SamsungMaintenance
1EFreezer Defrost Sensor Error
Applies to: Samsung French Door / Side-by-Side Refrigerator
The freezer defrost temperature sensor (thermistor) circuit is open, shorted, or reading outside the permissible ohmic temperature curve.
Refrigerator & Freezer Error Codes & Diagnostics
Modern refrigeration relies on digital inverter compressors and adaptive defrost cycles. Use our multimeter test guides to evaluate sensor resistances and control board outputs.
Search & Filter by BrandRefrigerators & Freezers
Brands:
All Refrigerators & Freezers Error Codes
No error codes found for this brand
We couldn't find documented codes for the selected brand in Refrigerators & Freezers.
SamsungMaintenance
2EFridge Room Temperature Sensor Error
Applies to: Samsung Twin Cooling French Door Refrigerator
The fresh food (refrigerator room) temperature sensor circuit is reading open circuit (infinite resistance) or short circuit (zero ohms).
SamsungCritical
84EInverter Compressor Locked Rotor
Applies to: Samsung Digital Inverter Refrigerator
The inverter board detects excessive current or zero rotor RPM feedback, tripping overcurrent protection due to a seized compressor or inverter IPM failure.
LGCritical
Er IFIce Maker Evaporator Fan Motor Jammed
Applies to: LG French Door / Door-in-Door Smart Refrigerator
Ice fan motor error (Er IF or 1F). The main control PCB sends power to the ice room cooling fan but does not receive tachometer rotation feedback for over 115 seconds.
WhirlpoolVerification
POPower Outage Warning / Temperature Rise
Applies to: Whirlpool Side-by-Side & French Door Refrigerator
Power Outage indicator. The control board was de-energized during an electrical blackout, and internal temperatures rose above 45°F (7°C) in the fresh food section.
GECritical
FFFreezer Evaporator Fan Motor Stalled
Applies to: GE Profile / Café French Door Refrigerator
Freezer fan fault (FF). The main control board senses that the freezer evaporator fan motor has failed to spin at target RPM for more than 2 consecutive hours.
Field Service Recommendations for Refrigerators & Freezers
Prior to performing any diagnostic testing or taking electrical measurements on residential or commercial equipment, always lock out / tag out (LOTO) power sources and shut off fuel or water supplies. Wear rated personal protective equipment (insulated gloves, eye protection) and use a calibrated CAT III/CAT IV digital multimeter.
If fault symptoms persist after executing our pinout checks and component resistance tests, consult a factory-certified technician or licensed HVAC/appliance specialist.